Additional Calibration Information
Editing Information on the Paper Tab
The Paper tab allows you to specify the paper being calibrated. The value displayed in the example is the default setting.
Attribute | Description |
|
|
|
|
Paper Type | Select either KODAK PROFESSIONAL Digital III Paper (Digital III) or |
| KODAK PROFESSIONAL Digital PT 2976 Paper (2976). |
|
|
To edit the configuration information on the Paper tab:
1.Change the Paper Type if needed.
2.If you have completed all editing of configuration information (including information on the other tabbed screens), click OK to save the changes and close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration screen and close the Edit Configuration screen.
3.To continue making changes to the Edit Configuration, click on another tab and make changes as needed.
Editing Information on the DP2 (Windows NT) or KPIS (Macintosh) Tab
The DP2 (or for Macintosh versions, KPIS) tab specifies whether to activate DP2 (or KPIS) interoperability, and if so, names the directory and filename designated for the DP2 (or KPIS) information.
There are some minor differences in the editing of DP2 and KPIS information; both are presented. Instructions for editing KPIS information begin on page
September 2000 |
