Dell manual 107, IDRAC6 Serial Settings, Serial Page Settings

Table 5-8. IPMI Serial Settings (continued)

Setting	Description
Flow Control	• None — Hardware Flow Control Off
	• RTS/CTS — Hardware Flow Control On
Channel Privilege	• Administrator
Level Limit	• Operator
	• User
Table 5-9. iDRAC6 Serial Settings
Setting	Description
Enabled	Enables or disables the iDRAC6 serial console. Checked=
	Enabled; Unchecked=Disabled
Timeout	The maximum number of seconds of line idle time before the
	line is disconnected. The range is 60 to 1920 seconds. Default
	is 300 seconds. Use 0 seconds to disable the Timeout feature.
Redirect Enabled	Enables or disables Virtual Console. Checked=Enabled;
	Unchecked=Disabled
Baud Rate	The data speed on the external serial port. Values are 9600
	bps, 19.2 kbps, 57.6 kbps, and 115.2 kbps. Default is
	57.6 kbps.
Escape Key	Specifies the <Esc> key. The default are the ^\ characters.
History Buffer Size	The size of the serial history buffer, which holds the last
	characters written to the Virtual Console. The maximum and
	default = 8192 characters.
Login Command	The iDRAC6 command line to be executed upon valid login.
Table 5-10. Serial Page Settings
Button	Description
Print	Print the Serial page.
Refresh	Refresh the Serial page.
Apply Changes	Apply the IPMI and iDRAC6 serial changes.

Terminal Mode Settings Opens the Terminal Mode Settings page.

Advanced iDRAC6 Configuration

107