Dell IDRAC6 Using the System Event Log SEL, 330, Status Indicator Icons Icon/Category Description

Table 19-6. IPv6 Information Fields (continued)

Field	Description
Autoconfig Enabled	Yes or No. AutoConfig lets the Server Administrator obtain
	the IPv6 address for the iDRAC NIC from the Dynamic Host
	Configuration Protocol (DHCPv6) server. Also, deactivates
	and flushes out the Static IP Address, Prefix Length, and
	Static Gateway values.
Use DHCPv6 to	Yes or No. Indicates if you want to use DHCPv6 to obtain
obtain DNS server	DNS server addresses.
Addresses
Preferred DNS Server	Indicates the static IPv6 address for the preferred DNS server.
Alternate DNS Server	Indicates the static IPv6 address for the alternate DNS server.

Using the System Event Log (SEL)

The SEL page displays system-critical events that occur on the managed system.

To view the System Event Log:

1In the System tree, click System.

2Click the Logs tab and then click System Event Log.

The System Event Log page displays the event severity and provides other information as shown in Table 19-7.

3Click the appropriate System Event Log page button to continue (see Table 19-7).

Table 19-7. Status Indicator Icons

Icon/Category Description

A green check mark indicates a healthy (normal) status condition.

A yellow triangle containing an exclamation point indicates a warning (noncritical) status condition.

A red X indicates a critical (failure) status condition.

A question mark icon indicates that the status is unknown.

330

Recovering and Troubleshooting the Managed System