Baldor mn1854 manual General Specifications, Vac, Vdc, Protection & Indicators Description

General Specifications

Description		Unit	LX2P1A06–2
Input Voltage Range	Nominal	VAC	115
	Minimum		92
	Maximum		132
Input Frequency		Hz	50/60 ± 5%
Nominal Output Bus	Nominal	VDC	170
(@ 115 / 230 input)	Minimum		88
	Maximum		220
Max. Output Current each axis
		ARMS	6
Resolution		in (mm)	4 x 10–5(1.016 x 10–3)
Efficiency		%	85
Motor Inductance		mH	2 – 60
Switching Frequency		kHz	20
Encoder		–	Optically Isolated, differential line driver, 5VDC, 500 KHz Max (2
			MHz post quadrature)
Inputs		–	8 – Programmable + 2 Limit and 1 Home inputs. (24VDC
			maximum – optically isolated ≤ 3mA sink current at ≥ 0.7Volts)
Output Power		–	12VDC @ 12mA (Pull–ups)
			5VDC @ 200mA (encoder)
Programmable Outputs		–	8 – Open collector (100mA maximum sink current,
			350mA maximum total sink amps).
Programming		–	Keypad or Serial communications
Operating Temperature		° F 〈° C)	32 to 100 (0 to 40); 122 (50) Maximum
Operating Altitude		ft (m)	8300 (2540) Maximum
Storage Temperature		° F 〈° C)	–13 to 158 (–25 to 70)
Humidity (non–condensing)		%	10–90
Shock			10G (according to DIN IEC 68–2–6/29)
Vibration			1G @ 10 – 150 Hz (according to DIN IEC 68–2–6/29)
Protection & Indicators		Description
LED Indications		Green – Normal operation; Red – Fault condition; Amber – FLASH
		fault Protection
Short Circuit		Disable on phase–to–phase, or phase–to–ground detected
Undervoltage		Disable if supply drops below 90 VAC
Over Temperature		Disable if heatsink > 70 ° C
Interlock		Disable if interlock connection broken
Regen/Overvoltage		Disable if bus voltage exceeds 220 VAC on 115 VAC units, 440 VAC
		on 230 VAC unit

8-2 Specifications & Product Data MN1854