Example of entering a program using the 0–9 keys. To create a program with the commands “AC.3 VE2 DI1 GO”, do the following steps: (you must be in the program editor, this example is writing to program #2).

1.Press EDIT→ F1→ 2→ ENTER to get to the first line of program 2.

2.Press F2, then press the #2 key. This will enter the AC command.

3.Press the decimal key.

4.Press the #3 key.

5.Press ENTER. This will insert a space after the 3 to separate the commands.

6.Press F1, then press the #2 key. This will enter the VE command.

7.Press the #2 key.

8.Press ENTER. This will insert a space after the 2 to separate the commands.

9.Press F2, then press the #1 key. This will enter the DI command.

10.Press the #1 key.

11.Press ENTER. This will insert a space after the 1 to separate the commands.

12.Press F1.

13.Press the #3 key. This will enter the GO command.

14.Press ENTER.

15.The display should now show the program “AC.3 VE2 DI1 GO”.

Save the program

When you have completed the program, and the display shows the program “AC.3 VE2 DI1 GO”, do the following:

1.Press ESC, the menu of Figure 4-4 is then displayed.

2.Press F1 (YES) or F3 (NO).

Figure 4-4

Save Program?

YesNo

Edit an existing program

1.Press “EDIT, F1 (PROG)” and you will see a display with a blinking cursor as shown in Figure 4-5. Enter the name of the program you wish to edit or scroll the list to locate the program.

Remember, ENTER inserts a space (delimiter). DEL deletes a character. Use the cursor keys to scroll through the program one line at a time.

Figure 4-5

EDIT PROGRAM

>_

4-6Keypad Operation

MN1854

Page 31
Image 31
Baldor mn1854 manual Save the program, Edit an existing program, 6Keypad Operation MN1854, Save Program? YesNo