Sharp PG-D100U Connecting to the Computer RGB Input/Output Terminals, 640 ⋅ 480 resolution

Connecting to the Computer RGB Input/Output Terminals

You can connect your projector to a computer for easy projection of full-color computer images, and an external monitor for simultaneous viewing.

1
		Side view of the projector
				RGB Signal
IN	COMPUTER RGB		OUT	Input Socket

1.Connecting to an IBM-PC (VGA, SVGA, XGA) Series computer – 1,024⋅ 768 maximum resolution

Plug the RGB signal cable correctly into the RGB INPUT terminal on the projector and into the RGB signal output terminal on the computer, and secure the plugs by tightening the thumb screws.

ANALOG RGB OUT	IBM-PC (VGA,
RGB Signal	SVGA, XGA)
Cable	Series (computer)
(Supplied)
	RGB Signal
	Output Socket

Note:

•This connection is possible only when using a computer with a VGA/SVGA/XGA or Mac display output port.

2 1						Macintosh Adaptor (Supplied)
Macintosh					OU	T
		ALOG	RG	B
	AN

RGB Signal

Output Socket

2

Side view of the projector

IN COMPUTER RGB OUT

RGB Signal	Macintosh
Input Socket
	RGB Signal Output Socket

ANALOG

RGB OUT

RGB Signal Cable (Supplied)

2.Connecting to a Macintosh Series Computer

•640 ⋅ 480 resolution

1First, connect the supplied Macintosh adaptor to the RGB signal output terminal on your Macintosh Series computer, as shown on the left, and secure the plugs by tightening the thumb screws.

2Next, firmly plug the supplied RGB signal cable into both the RGB input terminal on the projector and the Macintosh adaptor on the computer, and secure the plugs by tightening the thumb screws.

•832 ⋅ 624 resolution

When connecting in the 832 ⋅ 624 dot mode, use a Macintosh adaptor with display mode switching function available from your local computer dealer.

E-16