Sharp PG-D100U Connecting to other compatible computers, Connecting an external monitor

4	MOUSE	FOR PC98 WIRED
					REMOTE
	OUT	AUDIO		OUT	COMPUTER
		L	R		AUDIO IN

3.Connecting to other compatible computers

When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA) or Macintosh series, a separate cable is needed. Please contact your dealer for ordering information.

Notes:

•Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.

•Connect the audio from the computer to the COMPUTER AUDIO INPUT terminal.

4.Connecting to the COMPUTER RGB AUDIO INPUT

•RGB AUDIO INPUT accepts COMPUTER RGB input.

•Connect a 3.5 mm Stereo Minijack-RCA L/R cable (not included) from the audio output terminal on the computer to the COMPUTER AUDIO IN terminal on the projector.

5

IN COMPUTER RGB OUT

Direct connection

or

External IBM-PC monitor

Optional Macintosh adaptor cable

U.S.A. ONLY

External Macintosh monitor

5. Connecting an external monitor

Connect your computer monitor to the projector’s COM- PUTER RGB OUTPUT terminal to view images simulta- neously on the external monitor and the projection screen.

Caution (Apple Macintosh)

Do not connect the COMPUTER RGB OUTPUT to any monitor except the following:

Apple Color RGB Monitor 13"/14" (640 ⋅ 480) or 16"/17" (832 ⋅ 624)

The output signal from the projector to the monitor should be the same as the input signal from the computer to the projector.

Example: Input 13"/14" (640 ⋅ 480) → Output (640 ⋅ 480) Input 16"/17" (832 ⋅ 624) → Output (832 ⋅ 624)

Note:

•When using the projector with an external IBM-PC monitor, connect the monitor using the supplied cable. When using the projector with a Macintosh monitor, an optional adaptor cable is required. Before using any other type of monitor, carefully check the monitor’s interface specifications and make sure that they match the specifications of the projector’s interface.

The external monitor output will only display an analog computer input signal. It will not display a digital or video input signal. To split the composite video signal, use a video distribution amplifier. This is available from your local dealer. The computer RGB output will only loop through the same

signal connected to the computer RGB input. (VGA IN → VGA OUT, Mac IN → Mac OUT)

E-17