Sharp PG-D100U E-ZOOM Function, Press the MENU button to select E-ZOOM mode, control

E-ZOOM Function

E-ZOOM Function

■This projector has an E-ZOOM (640 ⋅ 480 dot, etc.) mode which enlarges the display when inputting an image of less than 800 ⋅ 600 dot in resolution. In the XGA (1024 ⋅ 768 dot) mode, compression enables full-mode display.

1

On-Screen Display

I M A G E	A D J .
		[ O F F ]
B L A C K S C R E E N
I N P U T D I S P L A Y		[ O F F ]
E - Z O O M		[ O N ]
R E V E R S E		[ O F F ]
I N V E R T		[ O F F ]
: S E L .
: A D J .	MENU : E N D

1.Press the MENU button to select E-ZOOM mode.

Press the MENU button. While the MENU screen is displayed, press the ADJUSTMENT / buttons to select IMAGE ADJ. Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT

/buttons to select E-ZOOM, and press the ADJUST- MENT / buttons to select ON. When the VGA (640 ⋅ 480 dot) is input, the projector will enter E-ZOOM mode.

E-ZOOM (ON): The screen image will be enlarged to 800 ⋅ 600 dot.

E-ZOOM (OFF): The resolution of the image does not change.

E-ZOOM (---): No input

Notes:

•Select ON 1 or ON 2 to set the status for either a 640 ⋅ 400 dot image or 640 ⋅ 350 dot image in the E-ZOOM mode.

•In the E-ZOOM mode, an enlarged display increases the amount of data processed on the screen and a compressed image decreases the number of lines displayed, which may make characters difficult to read.

2	2. Press the E-ZOOM button on the remote
	control.
	The E-ZOOM button on the remote control can be used to
	select E-ZOOM and NO E-ZOOM modes.
	Note:
	• In SVGA (800 ⋅ 600 dots) or Mac 16" (832 ⋅ 624 dots) mode,

E-ZOOM (ON)	E-ZOOM (OFF)	(---) appears, indicating the E-ZOOM function does not
		operate in this mode.

3. Press the MENU button anytime to exit E-ZOOM mode.

Notes:

• E-ZOOM function does not operate in SVGA (800 ⋅ 600), Mac 16" (832 ⋅ 624), NTSC, PAL, or SECAM INPUT modes.

• When connecting to some Mac 16" notebook computers, 832 ⋅ 624 dot signals may be output even in 640 ⋅ 480 mode, thus disabling the E-ZOOM function.

• When connecting to some SVGA notebook computers, 800 ⋅ 600 dot signals may be output even in 640 ⋅ 480 mode, thus disabling the E-ZOOM function.

E-26