VIDEO
• N T S C
For viewing the picture from a video source connected to: VIDEO INPUT or
7. Select input
Press the INPUT SELECT button to switch the picture input. When you press the button, the current input mode is displayed for about 4 seconds. If you press the button again while the input mode is displayed, the mode changes as shown on the left.
Confirm the selected input terminal and press the INPUT SELECT button.
Notes:
RGB COMPUTER RGB
1024×768
6 0 H z
• This can be selected directly using the VIDEO and DATA |
buttons on the remote control. |
• In VIDEO mode, the system being received will be indicated |
below the “VIDEO” display. |
• When selecting RGB mode, the resolution being displayed will |
be indicated under “RGB,” as shown on the left. (Refer to the |
second example when connecting to Mac display.) |
RGB
1024×768
6 0 H z
Mac RGB
640×480
35 KHz
RGB
800×600
6 0 H z
RGB
640×480
34.97 KHz
RGB
832×624
• When no signals are being received, “NO SIGNAL” will be |
displayed. When receiving a signal the projector is not preset |
to receive, “NOT REG.” will be displayed. (This display |
function does not operate in Video mode.) |
8. Adjust the volume
The number of displayed segments (0~60) increases or decreases as the volume is raised or lowered.
V O L U M E
3 8
Press the VOLUME
MUTE
•Press the MUTE button to temporarily turn off the sound.
•Press the MUTE button once again to turn the sound back on.
POWER 
LAMP 
TEMP. 
9.To turn off the power from the projector or remote control
The power can be temporarily turned off by pressing the POWER ON/OFF button on either the projector or remote control.
The POWER indicator will turn red and the cooling fan will run for 90 seconds, then the power will turn off, and the projector will return to STANDBY mode.
The power can be turned on again either from the projector or remote control. When the power is turned on, the POWER indicator and LAMP REPLACEMENT indicator light green.
Note:
•When the MAIN POWER is off on the projector set, the power cannot be turned on from the remote control.
