Sharp PG-D100U operation manual Connecting the Projector RGB Computer

Connecting the Projector (RGB: Computer)

•Please carefully read the manual of the computer you will be connecting.

•Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The computer should always be turned on last.

•Press on the portion labeled PUSH and open the cover to make the necessary connections.

To display input terminal
To RS-232C terminal
			9-pin D-Sub			15-pin D-Sub
			PC CONTROL	MOUSE	FOR PC98		WIRED
							REMOTE
6-pin DIN
VIDEO IN	AUDIO IN
S-VIDEO		IN	COMPUTER RGB	OUT	AUDIO	OUT	COMPUTER
VIDEO	L	R			L	R	AUDIO IN
4-pin DIN

Macintosh Adaptor (Supplied)

Mouse Control Cable for Macintosh Series (Supplied)

9-pin D-Sub

9-pin D-Sub

Mouse Control

Cable (Supplied)

15-pin D-Sub

Mouse Control Cable for IBM PS/2 (Supplied)

RGB Signal Cable (Supplied)

Audio cable for personal computer (sold separately)

•You can connect your projector to a computer for easy projection of full color computer images and an external monitor for simultaneous viewing. See page 16 and 17 for details of the connections.

•Refer to page 18 for a list of personal computers connectable to the projector. Use with computers other than those listed may cause some of the functions not to work.

•When the RS-232C terminal on this unit is connected to a personal computer via an RS-232C cable (cross type), the personal computer can control the projector and the status of the projector can be checked. See page 35 and 36 for details.

•By connecting the projector mouse terminal to your personal computer’s mouse terminal, using the supplied mouse control cables, you can use the remote control in place of the computer’s mouse. Refer to page 8 for details.

Notes:

•The wireless mouse or RS-232C function may not operate if your computer port is not correctly set-up. Please refer to your computer owners manual for details on setting-up/installing the correct Mouse Driver.

•Do not connect or remove the mouse control cable or RS-232C cable to/from your computer while it is on. This may damage your computer.

•Do not connect to the mouse input terminal for IBM/MAC and mouse input terminal for PC98 simultaneously.

E-15