Sharp PG-D100U Using the Blue Screen Function, Using the On-Screen Display Override Function

On-screen Display

I M A G E	A D J .
		[ O N ]
B L U E S C R E E N
		[ O F F ]
B L A C K S C R E E N
		[ O F F ]
I N P U T D I S P L A Y
S Y S T E M
		[ O F F ]
R E V E R S E
		[ O F F ]
I N V E R T
: S E L .
: A D J .	MENU : E N D

On-screen Display

REMAIN 5M

REMAIN 4M

REMAIN 1M

On-screen Display

I M A G E	A D J .
		[ O F F ]
B L A C K S C R E E N
I N P U T D I S P L A Y		[ O F F ]
E - Z O O M		[ O F F ]
R E V E R S E		[ O F F ]
I N V E R T		[ O F F ]
: S E L .
: A D J .	MENU : E N D

Using the Blue Screen Function

This projector is equipped with a Blue Screen function that will turn the screen blue when the video input termi- nal is not connected to anything, or the video component is turned off.

•Press the MENU button. While the MENU screen is

displayed, press the ADJUSTMENT /buttons to select IMAGE ADJ. Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT / buttons to select “BLUE SCREEN,” and press the ADJUSTMENT / buttons to select ON or OFF. Press the MENU button to return to the normal screen.

•When the Blue Screen function is on, the screen will turn blue when no video signal is being input through the video input terminal.

•When the Blue Screen function is on, and no video signal is input via the input terminal for more than 15 minutes, the power is automatically turned off.

•The indicators appear as shown each minute before the power is turned off, from five minutes before until one minute before.

Notes:

•The Blue Screen Function does not operate in RGB mode.

•When the power is turned off, the POWER indicator will light red.

•To turn the power on again, press the POWER button to set it to OFF, then press it again to set it to ON.

Using the On-Screen Display Override Function

The On-Screen Displays (“RGB 1024 ⋅ 768, 60Hz,” etc.) that appear during input select can be turned off.

•Press the MENU button. While the MENU screen is

displayed, press the ADJUSTMENT /buttons to select IMAGE ADJ. Then press the ENTER button to display the IMAGE ADJ. screen as shown. Press the ADJUSTMENT / buttons to select “INPUT DISPLAY,” and press ADJUSTMENT / buttons to select ON or OFF.

•When OFF is selected, the On-Screen Display (“RGB 1024 ⋅ 768, 60Hz,” etc.) will not be displayed during input select.

E-29