Sharp PG-D100U operation manual Connection Pin Assignments

Connection Pin Assignments

Analog RGB Signal Input and Output Terminal : 15-pin mini D-sub female connector

5

10

15

1

6

11

Computer Input

Analog

1.	Video input (red)	8.	Earth (blue)
2.	Video input (green)	9.	GND
3.	Video input (blue)	10. GND
4.	Reserve input 1	11.	GND
5.	Composite sync (Mac only)	12. Reserve input 2
6.	Earth (red)	13. Horizontal sync signal
7.	Earth (green)	14. Vertical sync signal
		15. Reserve input 3

Mouse Input Terminal (for IBM/Mac) : 9-pinD-sub female connector

		Pin No.	Signal	Name	I/O	Reference
		1	CD	Carrier Detect	Input	Connected to internal circuit
5	1	2	RD	Receive Data	Input	Connected to internal circuit
		3	SD	Send Data	Output	Connected to internal circuit
		4	ER	Equipment Ready	Output	Connected to internal circuit
		5	SG	Signal Ground		Connected to internal circuit
		6	DR	Data Set Ready	Output	Not connected
		7	RS	Request to Send	Output	Connected to internal circuit
9	6
		8	CS	Clear to Send	Input	Connected to internal circuit
		9	CI	Ring Indicator	Input	Connected to internal circuit

Mouse Input Terminal (for NEC PC98 series for Japan) : 9-pin mini DIN connector

	8			Pin No.	Signal	I/O	Reference
				1	+5V	Input	Computer output
9		7		2	XA	Input	Computer output
				3	XB	Input	Computer output
				4	YA	Input	Computer output
6			3	5	YB	Input	Computer output
				6	LEFT	Input	Computer output
				7	NC	Input	Not connected
5		4		8	RIGHT	Input	Computer output
				9	GND		Computer output
2	1

RS-232C terminal : 9-pin D-sub male connector

		Pin No.	Signal	Name	I/O	Reference
		1	CD			Not connected
1	5	2	RD	Receive Data	Input	Connected to internal circuit
		3	SD	Send Data	Output	Connected to internal circuit
		4	ER			Not connected
		5	SG	Signal Ground		Connected to internal circuit
		6	DR	Data Set Ready	Output	Not connected
		7	RS	Request to Send	Output	Connected to internal circuit
6	9
		8	CS			Not connected
		9	CI			Not connected

E-34