Example of a standard setup
TOP VIEW
90°
→ Lens center
| SIDE VIEW |
| Lens center |
90° | → |
|
The projector lens should be centered in the middle of the screen.
If the projector and screen are not centered properly, the picture will be distorted, making viewing difficult.
■Using the horizontal reverse function makes the following setups possible.
Example of a reversed image setup
•By placing a mirror (normal flat type) in front of the lens and using the horizontal reverse function, the image reflected from the mirror can be projected onto the screen.
•Rear projection with a rear projection screen is also possible when using the horizontal reverse function.
90°
AUDIENCE SIDE
▼
▼
Rear Projection
Mirror
The projector lens should be centered in the middle of the screen.
If the projector and screen are not centered properly, the picture will be distorted, making viewing difficult.
Example of a ceiling-mount setup
Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to obtain the manufacturer recommended ceiling mount bracket (sold separately).
TOP VIEW
Lens→center
SIDE VIEW
Upper edge of screen (white portion)
→ Lens center
•If the relative positions of the projector and the screen are not properly adjusted, the picture will be distorted.
