SMSC EZ Card 10 LED Indicators

LED Indicators

The cards contain two LEDs for monitoring network conditions.

The function of each LED is described below. Refer to the fol-

lowing figure for the LED location.

Figure 1-2. LED Indicators

Color: Green

Function: Twisted-pair link status indicator

When lit, this LED indicates an active connection between the

network card and a 10BASE-T hub or switch.

Note: The Link Status LED does not monitor the condition of

the BNC and AUI connections. When the card is con-

figured for these connections, this LED is always lit.

INTRODUCTION

EZ Card PCI 3/31/98 4:18 PM Page 1-3

Contents

Main Page Page i A BOUT THIS G P ii T ABLE OF C Chapter 1 Introduction .................................................. 1-1 2 Installing the Card ........................................ 2-1 Appendices List of Figures List of Tables iv 1-1 Features C I Hardware Description I LAN Connectors 1-2 LED Indicators I Link Status (Lk) 1-3 1-4 C INSTALLING THE CARD 2-1 INSTALLING THE CARD 2-2 General APPENDIX A S A-1 Operating Environment EMC/Safety Compliances S A-2 Network Drivers S A-3 APPENDIX B PIN ASSIGNMENTS AUI Connector P IN A B-2 Page Running the Setup Program C-2 Viewing the Current Configuration C-3 Setting Up a New Configuration C-4 C-5 Running the Diagnostics EEPROM Test Testing the Card C-6 Testing the Network Connection C-7 Configuring the Card in Older PCI Computers C-8 C-9 APPENDIX D G D-1 G D-2 I Page Limited Warranty LIMITED WARRANTY Standard Microsystems Corporation 80 Arkay Drive Hauppauge, NY 11788 516-273-3100 C FCC Class B CDOC Class B Page Printed on recycled paper. Publication Number: 79-000559-000