INSTALLING THE CARD
4.Power on the PC.
Hardware installation has been completed. Switch on power to the PC.
Note: Your network should be configured automatically by the PCI computer’s BIOS Setup Program. However, some manual configuration may be required in older PCI machines. Refer to “Configuring the Card in Older PCI Computers” in Appendix C for related information.
5.Run the Diagnostic program to check the card's hard- ware installation.
For related topics, see “Running the Setup Program” in Appendix C.
Caution! Be sure to run this program before installing the appropriate driver. Otherwise, your PC will hang.
6.Install the driver.
The driver diskette contains all the driver programs supported by these cards. Refer to the RELEASE.TXT file in the root directory for a listing of these programs. The drivers for different network operating systems are contained in sepa- rate subdirectories. Refer to the Readme text file in each subdirectory for instructions on driver installation.
