Table 9-5. Virtual Console and Virtual Media Page Buttons

Button

Definition

 

 

Refresh

Reloads the Virtual Console and Virtual Media page.

Launch Virtual Console Opens a Virtual Console session on the targeted remote system.

Print

Prints the Virtual Console and Virtual Media page.

 

 

3If a Virtual Console session is available, click Launch Virtual Console.

NOTE: Multiple message boxes may appear after you launch the application. To prevent unauthorized access to the application, navigate through these message boxes within three minutes. Otherwise, you will be prompted to relaunch the application.

NOTE: If one or more Security Alert windows appear in the following steps, read the information in the window and click Yes to continue.

The management station connects to the iDRAC6 and the remote system’s desktop is displayed in the iDRAC6 Virtual Console Viewer Application.

4Two mouse pointers appear in the viewer window: one for the remote system and one for your local system. You can change to a single cursor by selecting the Single Cursor option under Tools in the iDRAC6 Virtual Console menu.

Virtual Console Preview

Before launching the Virtual Console, you can preview the state of the Virtual Console on the SystemPropertiesSystem Summary page. The Virtual Console Preview section displays an image showing the state of the Virtual Console. The image is automatically refreshed every 30 seconds.

NOTE: The Virtual Console image is available only if you have enabled Virtual Console and if iDRAC6 Enterprise card is present.

Table 9-6 provides information about the available options.

212

Using GUI Virtual Console

Page 212
Image 212
Dell IDRAC6 manual Virtual Console Preview, 212, Virtual Console and Virtual Media Page Buttons Definition