Dell IDRAC6 manual Shows a sample file with the new line, Sample File /etc/innitab

Table 5-3 shows a sample file with the new line.

Table 5-3. Sample File: /etc/innitab

#

#inittab This file describes how the INIT process should set up

#the system in a certain run-level.

#

#Author: Miquel van Smoorenburg

#Modified for RHS Linux by Marc Ewing and Donnie Barnes

#Default runlevel. The runlevels used by RHS are:

#0 - halt (Do NOT set initdefault to this)

#1 - Single user mode

#2 - Multiuser, without NFS (The same as 3, if you do not have

#networking)

#3 - Full multiuser mode

#4 - unused

#5 - X11

#6 - reboot (Do NOT set initdefault to this)

#

id:3:initdefault:

#System initialization. si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0 l1:1:wait:/etc/rc.d/rc 1 l2:2:wait:/etc/rc.d/rc 2 l3:3:wait:/etc/rc.d/rc 3 l4:4:wait:/etc/rc.d/rc 4 l5:5:wait:/etc/rc.d/rc 5 l6:6:wait:/etc/rc.d/rc 6

Advanced iDRAC6 Configuration

95