Table 5-12. Terminal Mode Settings Page Buttons (continued)

ButtonDescription

Return to Serial Port Return to the Serial Port Configuration page.

Configuration

Apply Changes

Apply the terminal mode settings changes.

 

 

Configuring the iDRAC6 Network Settings

CAUTION: Changing your iDRAC6 Network settings may disconnect your current network connection.

Configure the iDRAC6 network settings using one of the following tools:

Web-based Interface — See "Configuring the iDRAC6 NIC" on page 49

RACADM CLI — See cfgLanNetworking in the iDRAC6 Administrator Reference Guide available on the Dell Support website at support.dell.com/manuals.

iDRAC6 Configuration Utility — See "Configuring Your System to Use an iDRAC6" on page 34

NOTE: If you are deploying the iDRAC6 in a Linux environment, see "Installing RACADM" on page 38.

Accessing the iDRAC6 Through a Network

After you configure the iDRAC6, you can remotely access the managed system using one of the following interfaces:

Web-based interface

RACADM

Telnet Console

SSH

IPMI

Advanced iDRAC6 Configuration

109

Page 109
Image 109
Dell IDRAC6 manual Configuring the iDRAC6 Network Settings, Accessing the iDRAC6 Through a Network, 109