17

Using the iDRAC6 Configuration Utility

Overview

The iDRAC6 Configuration Utility is a pre-boot configuration environment that allows you to view and set parameters for the iDRAC6 and for the managed server. Specifically, you can:

View the firmware revision numbers for the iDRAC6 and Primary Backplane firmware

Enable, or disable the iDRAC6 local area network

Enable or disable IPMI Over LAN

Configure LAN parameters

Enable or disable Auto–Discovery and configure the Provisioning Server

Configure Virtual Media

Configure Smart Card

Change the administrative username and password

Reset the iDRAC6 configuration to the factory defaults

View System Event Log (SEL) messages or clear messages from the log

Configure LCD

Configure System Services

The tasks you can perform using iDRAC6 configuration utility can also be performed using other utilities provided by the iDRAC6 or Dell OpenManage software, including the Web-based interface, the SM-CLP command line interface, and the local and remote RACADM command line interface.

Using the iDRAC6 Configuration Utility

301

Page 301
Image 301
Dell IDRAC6 manual Using the iDRAC6 Configuration Utility, 301