HP 7000 dl Router Ip dhcp release renew, Config#interface atm 1.1 config-atm 1.1#ip dhcp release

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

ip dhcp [release renew]

Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable when using DHCP for IP address assignment.

Syntax Description

release	Use this keyword to release DHCP IP address.
renew	Use this keyword to renew DHCP IP address.

Default Values

No default values required for this command.

Command Modes

(config-interface)# Interface Configuration Mode

Usage Examples

The following example releases the IP DHCP address for the ATM sub-interface 1.1:

(config)#interface atm 1.1 (config-atm 1.1)#ip dhcp release

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 674