HP 7000 dl Router manual Client-identifier identifier

SROS Command Line Interface Reference Guide DHCP Pool Command Set

client-identifier <identifier>

Use the client-identifiercommand to specify a unique identifier (in dotted hexadecimal notation) for a Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this command to remove a configured client-identifier.

Syntax Description

<identifier>	Specify a custom client-identifier using a text string (that is converted to a
	hexadecimal equivalent) or 7 to 28 hexadecimal numbers (with colon delimiters).
	OR
	Specify the hexadecimal MAC address including a hexadecimal number added to
	the front of the MAC address to identify the media type.
	For example, specifying the client-identifierfor a MAC address of
	d217.0491.1150 defines the client identifier as 01:d2:17:04:91:11:50 (where 01
	defines the media type as Ethernet).
	For example, a custom client identifier of 0f:ff:ff:ff:ff:51:04:99:a1 may be entered
	using the <identifier> option.
Default Values
client-id	Optional. By default, the client identifier is populated using the following formula:
	TYPE: INTERFACE SPECIFIC INFO : MAC ADDRESS
	Where TYPE specifies the media type in the form of one hexadecimal byte (refer
	to hardware-address<hardware-address> <type> on page 362 for a detailed
	listing of media types) and the MAC ADDRESS is the Media Access Control
	(MAC) address assigned to the first Ethernet interface in the unit in the form of six
	hexadecimal bytes. (For units with a single Ethernet interface, the MAC
	ADDRESS assigned to Ethernet 0/1 is used in this field).
	INTERFACE SPECIFIC INFO is only used for Frame Relay interfaces and can be
	determined using the following:
	FR_PORT# : Q.922 ADDRESS
	Where the FR_PORT# specifies the label assigned to the virtual Frame Relay
	interface using four hexadecimal bytes. For example, a virtual Frame Relay
	interface labeled 1 would have a FR_PORT# of 00:00:00:01.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 356