HP 7000 dl Router manual Arp arpa, Config#interface eth 0/1 config-eth 0/1#arp arpa

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

arp arpa

Use the arp arpa command to enable address resolution protocol on the Ethernet interface.

Syntax Description

arpa Keyword used to set standard address resolution protocol for this interface.

Default Values

The default for this command is arpa.

Command Modes

Ethernet Interface Configuration Modes

Usage Examples

The following example enables standard ARP for the Ethernet interface:

(config)#interface eth 0/1 (config-eth 0/1)#arp arpa

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 439