HP 7000 dl Router manual Redistribute connected metric value, Metric value

Router (RIP) Configuration Command Set

redistribute connected [metric <value>]

Use the redistribute connected command to pass routes from one network to another, regardless of the routing protocol implemented on the routing domain. Using the connected keyword allows the propagation of routes connected to other interfaces using the RIP routing protocol. Use the no form of this command to disable the propagation of the specified route type.

Syntax Description

connected	Optional keyword that specifies the Secure Router OS to only propagate
	connected routes to other networks
metric <value>	Optional. Specifies the hop count to use for advertising redistributed OSPF routes
	in RIP.

Default Values

By default, RIP is not enabled.

Command Modes

(config-rip)# Router (RIP or OSPF) Configuration Mode required

Functional Notes

Redistributing connected routes imports those routes into RIP without the interfaces in question actually participating in RIP. The connected routes imported this way are not covered by a network command and therefore do not send/receive RIP traffic.

Usage Examples

The following example passes the connected routes found in the route table to other networks running the RIP routing protocol:

(config)#router rip

(config-rip)#redistribute connected

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 899