HP 7000 dl Router Show ip igmp interface interface, Enable #show ip igmp interface eth 0/1 is UP

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip igmp interface <interface>

Use the show ip igmp interface command to display multicast-related information per-interface. If no interface is specified, this command shows information for all interfaces.

Syntax Description

<interface>	Optional. Designates the display of information for a specific interface (in the format
	type slot/port). Enter the show ip igmp interface ? command for a complete list of
	interfaces.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

>enable

#show ip igmp interface eth 0/1 is UP

Ip Address is 10.22.120.47, netmask is 255.255.255.0

IGMP is enabled on interface

Current IGMP version is 2

IGMP query interval is 60 seconds

IGMP querier timeout is 120 seconds

IGMP max query response time is 10 seconds

Last member query count is 2

Last member query response interval is 1000 ms

IGMP activity: 548 joins, 0 leaves

IGMP querying router is 0.0.0.0

IGMP helper address is disabled

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 150