HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 733

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

backup auto-backup

Use the backup auto-backupcommand to configure the PPP interface to automatically attempt a backup upon failure. For more detailed information on PPP backup functionality, refer to the Functional Notes and Technology Review sections of the command.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically attempt backup upon a failure.

Command Modes

(config-fr 1.16)#	Virtual Frame Relay Sub-Interface Configuration Mode
(config-ppp 1)#	PPP Interface Configuration Mode

Usage Examples

The following enables automatic backup on the endpoint:

(config)#interface ppp 1 (config-ppp 1)#backup auto-backup

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 733