HP 7000 dl Router manual Backup call-mode role, Sample config for remote router dialing out

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

backup call-mode <role>

Use the backup call-modecommand to combine user data with pattern data to ensure data does not mirror standard DDS loop codes (use only on 64 kbps circuits without Frame Relay signaling). Use the no form of this command to return to the default value.

Syntax Description

<role>	Selects the role the router will take in backup of this interface.
answer	Answer and backup primary link on failure.
answer-always	Answer and backup regardless of primary link state.
originate	Originate backup call on primary link failure.
originate-answer	Originate or answer call on primary link failure.
originate-answer-always	Originate on failure; answer and backup always.

Default Values

<role>originate-answer

Command Modes

(config-fr 1.16)#	Virtual Frame Relay Sub-Interface Configuration Mode
(config-ppp 1)#	PPP Interface Configuration Mode

Functional Notes

The majority of the configuration for PPP backup is configured in the PPP interface’s . However, the numbers dialed are configured in the primary interface. Full sample configurations follow:

Sample config for remote router (dialing out)

hostname "Remote7203dl" enable password password

!

interface eth 0/1

ip address 192.168.1.254 255.255.255.0 no shutdown

!

interface modem 1/3

no shutdown

!

interface t1 1/1

coding b8zs framing esf clock source line

tdm-group 1 timeslots 1-24

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 736