SROS Command Line Interface Reference Guide

E1 Interface Configuration Command Set

 

 

ts16

Use the ts16 command to enable timeslot 16 multiframe to be checked on the receive signal. Use the no form of this command to disable ts16.

Syntax Description

No subcommands.

Default Values

No defaults necessary for this command.

Command Modes

(config-e1 1/1)#

E1 or G.703 Interface Configuration Mode required.

(config-e1 1/2)#

 

Usage Examples

The following example enables timeslot 16 multi-framing:

(config)#interface e1 1/1 (config-e1 1/1)#ts16

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

544

Page 544
Image 544
HP 7000 dl Router manual Ts16, Config#interface e1 1/1 config-e1 1/1#ts16