SROS Command Line Interface Reference Guide

Enable Mode Command Set

 

 

debug sntp

Use the debug sntp command to enable debug messages associated with the Simple Network Time Protocol (SNTP). All SNTP Packet Exchanges and time decisions are displayed with these debugging events enabled. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

#

Enable Command Mode

Functional Notes

The debug sntp command activates debug messages to aid in troubleshooting SNTP protocol issues.

Usage Examples

The following is an example output for the debug sntp command:

>enable

#debug sntp

#config term

(config)#sntp server timeserver.localdomain

2002.12.11 15:06:37 SNTP.CLIENT sent Version 1 SNTP time request to 63.97.45.57 2002.12.11 15:06:37 SNTP.CLIENT received SNTP reply packet from 63.97.45.57 2002.12.11 15:06:37 SNTP.CLIENT setting time to 12-11-2002 15:06:02 UTC 2002.12.11 15:06:37 SNTP.CLIENT waiting for 86400 seconds for the next poll interval

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

94

Page 94
Image 94
HP 7000 dl Router manual Debug sntp