HP 7000 dl Router manual Remote-loopback, Config#interface t1 1/1 config-t11/1#remote-loopback

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

remote-loopback

Use the remote-loopbackcommand to configure the interface to respond to loopbacks initiated by a remote unit (or the service provider). Use the no form of this command to disable this feature.

Syntax Description

No subcommands.

Default Values

By default, all interfaces respond to remote loopbacks.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: T1 (t1 1/1) and DDS (dds 1/1)

Usage Examples

The following example enables remote loopbacks on the T1 interface:

(config)#interface t1 1/1 (config-t11/1)#remote-loopback

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 515