Nortel Networks N300 Connecting With ADSL, Connecting with 3G, Configuring 3G backup, YML15WN

NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router

Connecting With ADSL

1.Select the ADSL only box and click Next

2.Enter the user ID/Password on this screen as supplied by your ISP

3.Click on Next to use these settings

4.You will then be asked to enter additional setup details.

Connecting with 3G

1.Select the 3G only box and click Next

2.Your modem will auto detect if it is compatible: This information can be seen at the top of the page

3.From the drop down Profile box select your 3G ISP, which will auto-fill your APN setting

4.Enter the username/password supplied by your 3G ISP.

Note: Not all 3G users will have a username/password. Only enter this information if you have been supplied one by your 3G ISP

5.Click on Next to use these settings

6.You will then be asked to enter additional setup details. This will be explained from Wireless Quick Setup

Configuring 3G backup

1.Select the ADSL with 3G backup box and click Next

2.Follow the instructions listed above for both ADSL and 3G to set up both connections

3.Check the Enable 3G Backup box and enter your desired backup settings

4.Click on Next to use these settings

5.You will then be asked to enter additional setup details. This will be explained from Wireless Quick Setup

YML15WN	aDSL2+/3G Wireless N300 4-Port Modem Router
www.netcomm.com.au	15