Nortel Networks manual MAC filter, ADSL2+/3G Wireless N300 4-Port Modem Router, ymL15WN

MAC filter

This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted based upon the unique 48-bit MAC address.

To add a MAC Address filter, click the Add button shown below.

To delete a filter, select it from the table below and click the Remove button.

Option	Description
MAC Restrict Mode	Disabled – Disables MAC filtering
	Allow: Permits access for the specified MAC addresses
	NOTE: Add a wireless device’s MAC address before clicking the Allow radio button or else
	you will need to connect to the Router’s web user interface using the supplied yellow Ethernet
	cable and add the wireless device’s MAC address.
Deny	Rejects access for the specified MAC addresses
MAC Address	Lists the MAC addresses subject to the MAC Restrict Mode. The Add button prompts an
	entry field that requires you type in a MAC address in a two-character, 6-byte convention: xx:
	xx:xx:xx:xx:xx where xx are hexadecimal numbers. A maximum of 60 MAC addresses can be
	added.

Enter the MAC address on the screen below and click Save/Apply.

ADSL2+/3G Wireless N300 4-Port Modem Router	ymL15WN
30	www.netcomm.com.au