NetComm Gateway Series - ADSL2+/3G Wireless N300
Security
Your Router can be secured with IP Filtering or Parental Control functions.
IP Filtering
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting condition. All conditions must be fulfilled when individual IP packets pass filter.
Outgoing IP Filter
The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match the filter rules will be
BLOCKED.
To add a filtering rule, click the Add button. The following screen will display.
Filter Name | The filter rule label |
|
|
Protocol | TCP, TCP/UDP, UDP or ICMP Source IP address |
|
|
Source IP address | Enter source IP address Source Subnet Mask |
|
|
Destination IP address | Enter source subnet mask |
|
|
Source Port (port or port:port) | Enter source port number or port range |
|
|
Destination IP address | Enter destination IP address |
|
|
Destination Subnet Mask | Enter destination subnet mask |
|
|
Destination port (port or port:port) | Enter destination port number or range |
|
|
Click Save/Apply to save and activate the filter.
YML15WN | aDSL2+/3G Wireless N300 |
www.netcomm.com.au | 43 |
