Nortel Networks N300 manual See the field descriptions below for more details, ymL15WN, Option

LAN

This screen allows you to configure the Local Area Network (LAN) interface on your Router.

See the field descriptions below for more details.

Option	Description
IP Address	Enter the IP address for the LAN interface
Subnet Mask	Enter the subnet mask for the LAN interface
Enable IGMP Snooping	Enable by ticking the box
	Standard Mode: In standard mode, multicast traffic will flood to all bridge ports
	when no client subscribes to a multicast group.
	Blocking Mode: In blocking mode, the multicast data traffic will be blocked.
	When there are no client subscriptions to a multicast group, it will not flood to
	the bridge ports.
Enable LAN side Firewall	Check box to enable Firewall on LAN
Disable DHCP Server	Disables the DHCP server. Only to be done if Static IP address is set up
Enable DHCP Server	Select Enable DHCP server and enter your starting and ending IP addresses
	and the lease time. This setting configures the router to automatically assign IP,
	default gateway and DNS server addresses to every DHCP client on your LAN
Enable DHCP Server Relay	To relay DHCP requests from the subnet with no DHCP server on it to a DHCP
	server on other subnets. DHCP Server Relay is disabled by default. To access
	enable DHCP relay, please un-tick NAT enable first, that means to disable NAT
	first, and then press save button.
Configure the second IP Address	Configure a second IP address by ticking the checkbox shown below and enter
and Subnet Mask for LAN	the following information:
Interface	Enter the secondary IP address for the LAN interface.
	Enter the secondary subnet mask for the LAN interface.

ADSL2+/3G Wireless N300 4-Port Modem Router	ymL15WN
40	www.netcomm.com.au