HP w22, w20 manual Setting the Optimal Resolution, Adjusting the Volume, Click Settings

Back to Contents Page

Settings

Setting the Optimal Resolution • Adjusting the Volume • Locking and Unlocking the OSD • Adjusting OSD Settings

Setting the Optimal Resolution

The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution, complete the setup procedure and make sure that the monitor is connected to the computer. Turn the monitor on and do the following:

1Click Start.

2Click Settings.

3Click Control Panel.

4Double-click Display.

5Click Settings.

6Set the resolution slide bar to 1680 x 1050.

NOTE: If 1680 x 1050 is not shown, download the monitor driver from the Web. See Using the Monitor for instructions.

Adjusting the Volume

While the monitor is turned on but the OSD menu is inactive, press the volume increase and decrease (Plus and Minus) buttons to adjust volume to the desired level. Volume can range from 0 (mute) to 100. The preset value is 50.

Locking and Unlocking the OSD

To change the lock status of the on-screen display (from locked to unlocked, or from unlocked to locked) press and hold the menu button for 10 seconds while the monitor is on. If the OSD is locked, the message “OSD Lock” displays for 10 seconds.

12