HP w20, w22 manual Attaching the Cables, Back to Contents Page

Back to Contents Page

Cables

Attaching the Cables

Attaching the Cables

You can attach a VGA cable, a DVI-D cable (provided for select models only), or both to this monitor. To use DVI, your computer must have a DVI-compliant graphics card. Connectors are found on the back of the monitor. If both of these cables are installed, the source of input can be selected using the source button on the front panel.

1Turn off your computer.

2Connect the built-in monitor speakers to the computer, using the audio cable (green connector).

3If you are attaching a VGA cable, connect one end of the 15-pin D-Sub VGA cable (blue connector) to the back of the monitor and connect the other end to the computer VGA port.

7