HP w22 manual Specifications, HP w20, Back to Contents Page

Back to Contents Page

Specifications

HP w20 • HP w22 • Preset Display Modes • Power Cord Set Requirements • Pin Assignments • Plug and Play DDC2B Feature

All specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower.

HP w20

Display Type		20.1 inches, TFT LCD	51.11 cm
Viewable Image Size		20.1-inch diagonal	51.11 cm
Tilt		–5° to 20°
Face Treatment		Antiglare polarizer with hard coating
		(select models only)
Maximum Weight (unpacked)		13 lb.	5.9 kg
Dimensions (including pedestal)
	Height	15.98 inches	405.89 mm
	Depth	9.84 inches	249.93 mm
	Width	19.14 inches	486.16 mm
Optimum Display Resolution		1680 x 1050 (60 Hz)
Text Mode		720 x 400
Dot Pitch		0.258 (H) x 0.258 (V) mm
Horizontal Frequency		24 to 80 kHz
Vertical Refresh Rate		48 to 75 Hz
Audio Power Output		2W / channel @ PC 1 Vrms
Speaker (R/L)		2W / 16 ohm speaker
Power Consumption		<55 watts typical
Input Terminal		1. VGA connector
		2. DVI-D connector
Environmental Requirements
Temperature:	Operating	41 to 104°F	5 to 40°C
	Non-operating	–4 to 140°F	–20 to +60°C
Relative Humidity		20 to 85% (non-condensing)
Power Source		100–240 V￿, 50–60 Hz
Altitude:	Operating	0 to 6,561.68 feet	0 to 2,000 m
	Non-operating	0 to 40,000 feet	0 to12,192 m

19