Nortel Networks N300 manual Interface grouping, LAN ports, YML15WN

NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router

Interface grouping

Interface grouping supports multiple ports to PVC and bridge groups. Each group performs as an independent network. To use this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button.

The Remove button removes mapping groups, returning the ungrouped interfaces to the default group. Only the default group has an IP interface.

To add an Interface Group, click the Add button. The following screen will appear. It lists the available and grouped interfaces. Follow the instructions shown below:

Automatically Add Clients with the following DHCP Vendor IDs

Add support to automatically map LAN interfaces to PVC’s using DHCP vendor ID (option 60). The local DHCP server will decline and send the requests to a remote DHCP server by mapping the appropriate LAN interface. This will be turned on when Interface Grouping is enabled.

LAN ports

Use this page to enable/disable the Virtual LAN Ports feature

YML15WN	aDSL2+/3G Wireless N300 4-Port Modem Router
www.netcomm.com.au	53