NetComm Gateway Series - ADSL2+/3G Wireless N300
Default settings
LAN (Management)
Static IP Address: | 192.168.1.1 |
|
|
Subnet Mask: | 255.255.255.0 |
|
|
Default Gateway: | 192.168.1.1 |
|
|
WAN (Internet)
WAN mode:
Wireless
SSID:
Channel:
Security:
WEP Key:
Interface Access
DHCP
NetComm Wireless
auto
WEP, 64bit
a1b2c3d4e5
Username:
Password:
admin
admin
Restore Factory Default Settings
Restoring factory defaults will reset the 3G15Wn to its factory default configuration. Occasions may present themselves where you need to restore the factory defaults on your 3G15Wn such as:
•You have lost your username and password and are unable to login to your 3G15Wn’s web configuration page;
•You have purchased your 3G15Wn from someone else and need to reconfigure the device to work with your ISP;
•You are asked to perform a factory reset by NetComm Support staff
In order to restore your 3G15Wn to its factory default settings, please follow these steps:
•Ensure that your 3G15Wn is powered on (for at least 10 seconds);
•Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the reset is in progress. Do not power off the unit at this point;
•When indicator lights return to steady green, reset is complete. The default settings are now restored. The entire process takes about 45 seconds to complete;
•Once you have reset your 3G15Wn to its default settings you will be able to access the device’s configuration web interface using http://192.168.1.1 with username ‘admin’ and password ‘admin’;
Connecting the 3G15Wn
Telephone
Exchange
ADSL2+
3G USB Modem
300Mbps Wireless Link
3G Tower
3G15Wn
LAN 1 | LAN 2 | LAN 3 | LAN 4 |
YML15WN | aDSL2+/3G Wireless N300 |
www.netcomm.com.au | 13 |
