Rosewill RNX-EasyN1 manual USB Adapter Adding a Profile - Windows 2000/XP/Vista

Quick Installation Guide

Wireless Adapter RNX-EasyN1

5.Carefully insert the USB adapter into the USB port. Windows will then detect and install the new hardware.

6.An R icon will then appear in the system tray. Right click on the R icon and then click on Launch Config Utilities.

Note: Click on Use Zero Configuration as Configuration Utility if you would like to use Windows Zero Config.

USB Adapter Adding a Profile – Windows 2000/XP/Vista

The Profile tab is used to store the settings of multiple Access Points such as home, office, café, etc. When adding a profile you are required to enter a profile name and SSID as well as configure the power-saving mode, network type, RTS/fragmentation threshold and encryption/authentication settings.

1. Profile: Enter a name for the profile; this does not need to be the same as the SSID.

2.SSID: Enter the SSID of the network or select one from the drop-down list.

3.Network Type: Select Infrastructure from the drop-down list.

4.TX Power: Select a transmit power from the drop-down list..

5.Click on the Apply button to save the changes.

5