HP 7000 dl Router manual Clear pppoe interface id, Enable #clear pppoe

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear pppoe <interface id>

Use the clear pppoe command to terminate the current PPPoE client session and cause the Secure Router OS to try and re-establish the session.

Syntax Description

<interface id> PPP interface number.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example ends the current PPPoE client session for ppp 1:

>enable

#clear pppoe 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 43