HP 7000 dl Router manual Client configuration pool poolname

SROS Command Line Interface Reference Guide IKE Policy Command Set

client configuration pool <poolname>

Use the client configuration pool command to configure the Secure Router OS to perform as mode-config server (edge device) when an IKE policy is negotiated.

Variations of this command include the following:

client configuration pool <poolname>

client configuration pool <poolname> initiate

client configuration pool <poolname> initiate respond client configuration pool <poolname> respond client configuration pool <poolname> respond initiate

Syntax Description

<poolname> The pool from which to obtain parameters to assign to the client.

Default Values

By default, if this command is not present in the IKE policy, the device allocates mode-config IP addresses, DNS server addresses, and NetBIOS name server addresses, and mode-config is not performed.

Command Modes

(config-ike)# IKE Policy Configuration Mode

Functional Notes

This command ties an existing client configuration pool to an IKE policy.

Usage Examples

The following example ties the ConfigPool1 configuration pool to this IKE policy:

(config-ike)#client configuration pool ConfigPool

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 378