HP 7000 dl Router manual Snmp-server source-interface interface

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server source-interface <interface>

Use the snmp-serversource-interfacecommand to tell the Secure Router OS where to expect SNMP traps to originate from (interface type). All SNMP originated packets (including traps and get/set requests) will use the designated interface’s IP address. Use the no form of this command to remove specified interfaces.

Syntax Description

<interface>	Specifies the physical interface that should originate SNMP traps. Enter
	snmp-servertrap-source ? for a complete list of valid interfaces.

Default Values

By default, there are no trap-source interfaces defined.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies that the Ethernet interface (ethernet 0/1) should be the source for all SNMP traps and get/set requests:

(config)#snmp-server source-interface ethernet 0/1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 343