HP 7000 dl Router manual Config-ppp 1#fair-queue

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

fair-queue <threshold>

Use the fair-queuecommand to enable weighted fair queuing (WFQ) on an interface. Use the no form of this command to disable WFQ and enable FIFO queueing for an interface. WFQ is enabled by default for WAN interfaces.

Syntax Description

<threshold>	Optional value that specifies the maximum number of packets that can be present
	in each conversation sub-queue. Packets received for a conversation after this
	limit is reached are discarded. Range: 16 to 512 packets.

Default Values

By default, fair-queue is enabled with a threshold of 64 packets.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: virtual PPP (ppp 1) and virtual Frame Relay interfaces
	(fr 1)

Usage Examples

The following example enables WFQ on the interface with a threshold set at 100 packets:

(config)#interface ppp 1

(config-ppp 1)#fair-queue 100

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 744