HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 407

SROS Command Line Interface Reference Guide Crypto Map Manual Command Set

ike-policy<policy number>

Use the ike-policycommand to ensure that only a specified IKE policy is used to establish the IPSec Tunnel. This prevents any mobile VPN policies from using IPSec policies that are configured for static VPN peer policies.

Syntax Description

<policy number> Enter the policy number of the policy to assign to this crypto map.

Default Values

No defaults necessary for this command.

Command Modes

(config-crypto-map)# Crypto Map Configuration Mode (IKE or Manual)

Usage Examples

The following example shows a typical crypto map configuration:

(config)#crypto ike policy 100

(config)#crypto map VPN 10 ipsec-manual (config-crypto-map)#description “Remote Office” (config-crypto-map)#match address VPN-10-vpn-selectors (config-crypto-map)#set peer 10.22.17.13 (config-crypto-map)#set transform-set esp-3des-esp-md5-hmac (config-crypto-map)#ike-policy 100

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 407