HP 7000 dl Router manual Set dscp, Config#qos map Voicemap 10 config-qos-map#set dscp

Quality of Service (QoS) Map Commands

set dscp <0-63>

The set dscp command is an optional command for a QoS map that can be used to modify the DSCP field (on matching packets) to the specified value.

Syntax Description

<0-63> Enter the decimal DSCP value.

Default Values

No default value is necessary for this command.

Command Modes

(config-qos-map)# QoS Map Configuration Mode required.

Usage Examples

This command sets the DSCP value (for all matching traffic) to 46:

(config)#qos map VOICEMAP 10 (config-qos-map)#set dscp 46

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 920