HP 7000 dl Router manual Frame-relay lmi-t392dce seconds

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-t392dce <seconds>

Use the frame-relaylmi-t392dcecommand to set the T392 polling verification timer for the DCE endpoint. Typical applications should leave the default value for this timer. Use the no form of this command to return to the default value.

Syntax Description

<seconds>Sets the timer value in seconds (valid range: 5-30)

Default Values

<seconds>10 seconds

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Functional Notes

The T392 sets the timeout (in seconds) between polling intervals. This parameter needs to be a few seconds longer than the T391 setting of the attached Frame Relay device.

Usage Examples

The following example sets the T392 timer for 15 seconds:

(config)#interface frame-relay 1 (config-fr1)#frame-relay lmi-t392dce 15

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 579