HP 7000 dl Router manual Erase filename startup-config, #erase startup-config

SROS Command Line Interface Reference Guide Enable Mode Command Set

erase [<filename> startup-config]

Use the erase command to erase the specified file.

Syntax Description

<filename>	Specifies the name of the file (located in FLASH memory) to erase.
startup-config	Erases the startup configuration file stored in NVRAM.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example erases the startup configuration file stored in NVRAM:

>enable

#erase startup-config

If a new startup-configuration file is not specified before power-cycling the unit, the Secure Router OS will initialize using a default configuration.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 100