Configuration 2

Handset Navigation Pad

Tonavigatethroughthephone
menus,usetheNavigationPad.The
selectbuttonisthesilverbuttonin
themiddleofthenavigationpad.
Thearrowsareusedtomoveup,
down,leftandrightthroughthe
phonemenus.
TheWireless-GIPPhonerequiresthatyouhavephoneservicethrougha
VoIPprovidertomakephonecalls.Inordertouseyourphone’sVoIPservice,
youmustfirstconnectyourWireless-GIPPhonetoawirelessnetwork
whichhasinternetaccess.
Whenyoupoweronthephoneforthefirsttime,youwillseethatthephone
isnotconfiguredtoconnecttoanetwork.Toconnectyourphonetoyour
wirelessnetwork,youmustfirstconfigurethephonebysettingupaWi-Fi
Profile.TherearetwowaystoconfiguretheWi-FiProfile:Automaticallyvia
Wi-FiProtectedSetupandManually.
NOTE:Thehandsetshouldbewithin300feet(90m)ofthe
Networktoconnect.
NavigationPad