HP 7000 dl Router manual Logging email address-listemail address email address

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

logging email address-list<email address> ; <email address>

Use the logging email command to specify one or more email addresses that will receive notification when an event matching the criteria configured using the logging email priority-levelcommand is logged by the Secure Router OS. See logging email priority-level [error fatal info notice warning] on page 315 for more information. Use the no form of this command to remove a listed address.

Syntax Description

<email address> Specifies the complete email address to use when sending logged messages (This field allows up to 256 characters.)

Enter as many email addresses as desired, placing a semi-colon (;) between addresses.

Default Values

By default, there are no configured logging email addresses.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example specifies three email addresses to use when sending logged messages:

(config)#logging email address-list admin@email.com;ntwk@email.com;support@email.com

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 313