HP 7000 dl Router manual Bgp log-neighbor-changes, Config-bgp#bgp log-neighbor-changes

SROS Command Line Interface Reference Guide BGP Configuration Command Set

bgp log-neighbor-changes

Use the bgp log-neighbor-changescommand to control the logging of neighbor state changes. Use the no form of this command to return to the default setting.

Syntax Description

No subcommands.

Default Values

By default, neighbor changes are not logged.

Command Modes

(config-bgp)# BGP Configuration Mode

Functional Notes

This command controls logging of BGP neighbor state changes (up/down) and resets. This information is useful for troubleshooting and determining network stability.

Usage Examples

The following example enables logging of BGP neighbor state changes:

(config-bgp)#bgp log-neighbor-changes

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 707